Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Accurate, Reliable
Ideal for long-term, unattended applications
Retired Product
 
 
 
 
 
Image Gallery

This product is no longer available and has been replaced by: HC2S3-L. Some accessories, replacement parts, or services may still be available.

Technical Description

The HMP45C probe uses a HUMICAP capacitive polymer H chip to measure relative humidity and a PRT to measure temperature. Yearly HMP45C recalibrations are recommended.

To reduce the current drain, power can be supplied to the HMP45C only during measurement when the sensor is connected to the datalogger’s switched 12 V terminal. Dataloggers that do not have a switched 12 V terminal, such as the CR510 or CR7, can use the SW12V switched 12 V device to switch power to the sensor only during measurement.

HMP45C-L Specifications

  • Supply Voltage: 12 Vdc nominal (typically powered by datalogger)
  • Current Drain: ≤4 mA (active)
  • Sensor Diameter: 2.5 cm (1 in.)
  • Sensor Length: 25.4 cm (10 in.)
  • Cable Diameter: 0.8 cm (0.3 in.)
  • Weight: 0.27 kg (0.6 lb)

Relative Humidity

  • Sensor: Vaisala’s HUMICAP® H-chip
  • Measurement Range:
    0.8% to 100% RH, non-condensing
  • Output Signal Range:
    0.008 to 1 Vdc
  • Accuracy at 20°C (against factory reference): ±1% RH
  • Accuracy at 20°C (field-calibrated against references):
    ±2% (0% to 90% RH);
    ±3% (90% to 100% RH)
  • Temperature Dependence: ±0.05% RH/°C
  • Long-Term Stability: Typically, better than 1% RH per year
  • Response Time: 15 s with membrane filter (at 20°C, 90% response)
  • Settling Time: 500 ms

Temperature

  • Temperature Sensor: 1000 ohm Platinum Resistance Thermometer
  • Measurement Range: -39.2° to +60°C
  • Output Signal Range:
    0.008 to 1.0 V
  • Accuracy:
    ±0.5°C (-40°C),
    ±0.4°C (-20°C),
    ±0.3°C (0°C),
    ±0.2°C (20°C),
    ±0.3°C (40°C),
    ±0.4°C (60°C)

Resources and Links

Ships With

(1) Adjustment Screwdriver from original mfg

(1) NIST Traceable Calibration Certificate

Home \ Products \ Components \ Sensors \ Air... \ HMP45C-L