Overview
The HC2A-S3 is a replacement sensor for the retired HC2S3-L Temperature and Relative Humidity Probe. The sensor is a drop-in replacement for existing installations, requiring no change in programming or wiring. This sensor does not ship with a cable. Please refer to the HC2S3CBL1-L if a cable is required.
Read MoreImages
Detailed Description
The HC2A-S3 sensor is an update to the retired HC2S3-L, manufactured by Rotronic AG. This sensor features an updated housing and the HYGROMER HT-1 next-generation sensing element. The HC2A-S3 is fully backward-compatible with the previous generation of sensor, with matching electrical and measurement specifications. However, the length of the sensor has increased by 2.5 cm (1.0 in.) and requires that the sensor be installed slightly lower in the radiation shield to optimize the position of the sensing elements in the shield.
Specifications
| Temperature Range | -50 to +100°C (-58 to +212°F) |
| Temperature Accuracy (10 to 30°C) | ±0.1°C |
| Humidity Range | 0 to 100% RH |
| Humidity Accuracy (10 to 30°C) | ±0.8% RH |
| Housing Material | Polycarbonate, white |
| Standard Dust Filter | Polyethylene, 40 μm |
| Sensor Type | HYGROMER® HT-1 |
| Standard Output Scaling | 0 to 1 V (-40 to +60°C / 0 to 100% RH) |
| Diameter | 15 mm (0.6 in.) |
| Length | 108 mm (3.3 in.) |
| Weight | 17 g (0.6 oz) |
Compatibility
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Miscellaneous
| Product | Compatible | Note |
|---|---|---|
| HC2S3CBL1-L |
Documents
Compliance
Frequently Asked Questions
Number of FAQs related to HC2A-S3: 2
-
No. The HC2A-S3 is fully compatible with the analog CRBasic instructions used for the retired HC2S3-L sensor.
-
No. The HC2A-S3 is fully compatible with the HC2S3CBL1-L cable (active set) and uses the same wiring colors.
Listed Under
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences