GPS16X-HVS-PW

Specifications

Measurement and Control Products for WEATHER

Measurement and Control Products for WATER

Measurement and Control Products for ENERGY

Measurement and Control Products for MACHINES

Measurement and Control Products for STRUCTURES

Measurement and Control Products for EARTH

Extreme Accuracy
Connects directly to datalogger

Request a Quote

Ask a Question

Overview

Specifications

Compatibility

Ordering

Support

Image Gallery

Technical Description

The GPS16X-HVS-PW consists of a receiver and an integrated antenna. It receives signals from orbiting Global Positioning System (GPS) satellites, and then uses the signals to calculate position and velocity. The GPS16X-HVS-PW also provides a highly accurate one-pulse-per-second (PPS) output for precise timing measurements.

The GPS16X-HVS-PW is manufactured by Garmin International. Campbell Scientific configures the receiver and modifies its cable. The modified cable terminates in in a connector compatible with our PWENC prewired enclosures, that then attaches directly to the control ports of a CR800, CR850, CR1000, or CR3000 datalogger.

The default settings are typically used. Changing the default settings or options requires the SC110 cable and a PC running GPS16 software. The software can be downloaded, at no charge, from the Garmin website (www.garmin.com).

GPS16X-HVS-PW Specifications

Receiver: WAAS enabled;
12 parallel channel GPS receiver continuously tracks and uses up to 12 satellites (up to 11 with PPS active) to compute and update the position
Update Rate:
Factory set to 1 s between updates;
programmable from 1 to 900 s
PPS Output:
1 Hz pulse;
1 µs accuracy;
width factory set to 80 ms
Baud Rate:
Factory set to 38400 bps
Operating Temperature:
-30° to 80°C
Storage Temperature:
-40° to 80°C
Operating Voltage:
8 to 40 Vdc
Current Drain @ 12 Vdc:
65 mA active
Velocity Accuracy:
0.1 knot RMS steady state
Diameter: 9.1 cm (3.58 in.)
Height: 4.2 cm (1.65 in.)
Weight: 332 g (12 oz.)