GPS16X-HVS
Compatibility Information
Datalogger Considerations
Our CR800, CR850, CR1000, and CR3000 dataloggers typically use the CRBasic GPS() instruction to read the GPS16X-HVS. For the GPS() instruction to set the time or use the pulse from the GPS sensor, some dataloggers need an updated clock chip. The clock chip is factory replaced (requires an RMA). Dataloggers with the following serial numbers need an updated chip:
| Datalogger | Serial Number |
| CR1000M | < 20409 |
| CR800, CR850 | < 7920 |
| CR3000 | < 3168 |
Compatible Contemporary Dataloggers
| CR200(X) Series | CR800/CR850 | CR1000 | CR3000 | CR5000 | CR7X | CR9000X |
 |
|
|
* | * |
Compatible Retired Dataloggers
| CR500 | CR510 | CR10 | CR10X | 21X | CR23X | CR9000 |
| * | * |
Notes:
*Contact Campbell Scientific about using the GPS16X-HVS with these dataloggers.
Mounting
The GPS16X-HVS mounts to a mast or crossarm via the 17212 Magnetic Mount and CM235 Magnetic Mount Stand.
Resources and Links
Feedback?