General Mounts
Sensor mounts applicable to a variety of sensors
CM220 Right-Angle Mounting Bracket
The CM220 right-angle mounting bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a CM202, CM204, or CM206 crossarm....
1049 0.75- x 1-inch NU-RAIL Crossover Fitting
The 1049 connects a 1-inch pipe to a 0.75-inch pipe. The 1049 is typically used to attach a sensor with a 0.75-inch pipe mount to...
17953 1- x 1-inch NU-RAIL Crossover Fitting
The 17953 connects a vertical 1-inch pipe to a horizontal 1-inch pipe. The 17953 is typically used to attach a sensor with a 1-inch vertical...
1017 0.75" x 0.75" NU-RAIL Crossover Fitting
CM216 Apex Sensor Mount for SS Tripod
The CM216 provides a 3/4- or 1-inch-IPS mounting pipe that extends 4 inches above the mast. It is a pipe with an adapter that allows...
CM230 Adjustable Inclination Mount
The CM230 is an adjustable mount to point directional antennas or sensors at a specific target. The inclination can be adjusted to any angle from...
CM235 Magnetic Mounting Stand
The CM235 consists of rectangular plate, mounting bracket, u-bolts, lock washers, and nuts. It allows one peripheral with a magnetic base to be mounted to...
6880 Mounting Bracket for Wind Sensor or IRGA
The 6880 attaches an intermediate wind speed/direction, snow depth, or IRGA sensor to an instrumentation tower or tripod. The 6880 terminates in a 3/4-inch diameter...
21271 1-to-3/4-inch Pipe Reducer
The 21271 is used to attach the NR01 net radiometer to a CM204 or CM206 crossarm. Campbell Scientific recommends mounting the crossarm to a CM300-series mounting...
Resources and Links
About General Mounts
General mounts attach a sensor or peripheral to a crossarm, mast, tower leg, or pole.
Feedback?