Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
RETIRED PRODUCT

This product is no longer available and has been replaced by: RF450. Some accessories, replacement parts, or services may still be available.

Technical Description

The FGR-115RC supported point-to-point and point-to-multipoint networks. It could serve as a field radio/modem connected to a datalogger, as a stand-alone repeater not connected to a datalogger, or as a base station radio/modem connected to a computer.

Freewave's FGR-115RC 1-Watt Spread Spectrum Radio was retired in July 2007.

FGR-115RC Specifications

  • Operating Frequency: 902 to 928 MHz
  • Type: Frequency Hopping Spread Spectrum (FHSS) Transceiver
  • Modulation: GFSK, 115.2 kbps or 153.6 kbps
  • Hopping Bands: 7, user selectable
  • Hopping Channels: 50 to 112, user selectable
  • Frequency Hopping Patterns:
    15 per band, 105 total, user selectable
  • Occupied Bandwidth: 230 kHz
  • Transmitter Power Output:
    100 mW to 1 W (+30 dBm)
  • Antenna Connector: Type N Female
  • Receiver Sensitivity:
    -108 dBm for 10-6 BER
    -110 dBm for 10-4 BER
  • Operating Temperature Range: -40° to +75°C
  • Power: 6 to 30 Vdc
  • I/O Data Rate: 38,400 to 115,200 bps
  • RS-232 Connector: 9-pin “D” DCE
  • Average Current Drain: 6 mA sleep, 21 mA idle, 86 mA while receiving, 500 mA while transmitting
  • Weight: 441 g (15.5 oz)
  • Dimensions:
    16.5 x 7.4 x 5.7 cm
    (6.5" x 2.9" x 2.2")

Resources and Links

Ships With

(*) Instruction Manual

(1) 20625 CD and diagnostic cable (per pair of radios)

(1) 18849 DC Power Cable

(1) 12 Vdc, 500 mA Wall Charger from original mfg

(1) Serial Cable from original mfg

*Ships With