Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
RETIRED PRODUCT

This product is no longer available and has been replaced by: RF450. Some accessories, replacement parts, or services may still be available.

Add to your Quote List

FGR-115RC Ordering Info
 
 
FGR-115RC
Freewave 900 MHz Spread Spectrum Radio
 
 
Retired
Ships Within Restockable Warranty Compliance
28 Days Yes -

Many of our products are built to order because they are customizable. Product build time can take up to the number of days indicated by the Ships Within value.

To estimate how long it will take to receive an order that contains multiple products, combine the largest Ships Within value with the transit time of the shipping method you select.

Some specialized products have large Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
  • (1) 12 Vdc, 500 mA Wall Charger from original mfg
  • (1) Instruction Manual
  • (1) Serial Cable from original mfg
  • (1) 18849 - 12 Vdc Power Cable for FGR-115RC Radios
  • (1) 20625 - Diagnostics and Programming Cable with Software
Other Accessories
 
 
14203
900 MHz 3 dBd Omnidirectional Antenna without Mounting Hardware
 
 
The 14203 is 3 dBd gain omnidirectional antenna. It is suitable for base station use where you need to communicate with multiple stations located in different directions. The 14203 is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line-of-sight.

The 14203 is suitable for outdoor use and terminates in a TYPE N female connector. The 14203 requires the COAXNTN cable to connect it to the radio.
15730
900 MHz 0 dBd Omnidirectional 1/4 Wave Whip Antenna
 
 
The 15730 is a unity gain, right angle, whip antenna that should reside inside a building or enclosure. It has an RPSMA connector that attaches to the radio via the 18686 Adapter.
15970
900 MHz 1 dBd Omnidirectional Dipole Antenna with Adhesive Mount
 
 
Adhesive backing on this antenna adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. The 15970 is a 1 dBd antenna that should reside inside a building or enclosure.
14204
900 MHz 0 dBd 1/2 Wave Omnidirectional Antenna with RPSMA Connector
 
 
Suitable for inside a building or enclosure, this 0 dBd, ½ wave whip antenna is adjustable from 0° to 90°. The antenna has an RPSMA connector that attaches to the radio via the 18686 Adapter.
14205
900 MHz 6 dBd Yagi Antenna with Mounting Hardware
 
 
The 14205 is a high-gain (6 dBd), directional (Yagi) antenna suitable for the outdoors. It transmits for longer distances and communicates with only one other station. The antenna has a TYPE N female connector that attaches to the radio via a COAXNTN-L cable.

Please note that because the FCC limits EIRP to 36 dBm, use of this antenna may require a reduction of the radio's transmit power.
16981
Surge Suppressor Kit for Satellite Transmitters with Type N Female Connector
 
 
The 16981 Surge Suppressor can be inserted between the COAXNTN-L cable and the FGR-115RC radio to provide a degree of protection from electrical discharge being conducted down the antenna cable.
14201
900 MHz 9 dBd Yagi Antenna with Mounting Hardware
 
 
Suitable for the outdoors, this high-gain (9 dBd), directional (Yagi) antenna has a narrow beam width, so precise aiming is mandatory. The 14201 is useful for longer distances and when communicating only with one other station. The antenna's TYPE N female connector attaches to one end of a COAXNTN-L cable. The other end of the cable attaches to the radio.

Please note that because the FCC limits EIRP to 36 dBm, use of this antenna may require a reduction of the radio's transmit power.
14221
900 MHz 3 dBd Omnidirectional Antenna with Mounting Hardware
 
 
Suitable for outdoor use, the 14221 is the highest gain (3 dBd) omnidirectional antenna available for this radio. It has a TYPE N female connector. The COAXNTN-L cable connects the antenna to the radio.
COAXNTN-L
RG8 Antenna Cable with 2 Type N Male Connectors
 
 
One end of this low-loss RG8 antenna cable terminates in a type N male connector that attaches to the 14203, 14201 or 14221 antenna. The other end terminates in another type N male connector that attaches to the radio.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
18663
Null Modem Cable, 9-Pin Male to 9-Pin Male
 
 
Either the 18663 or the SC105 is used to connect the radio with the datalogger. The 18663 null modem cable connects the radio to the datalogger's RS-232 port.
18686
Coaxial Adapter, Type N Male to RPSMA Female
 
 
Whip antennas attach to the radio via the 18686 RPSMA Female-to-Type N Male Adapter.
SC105
CS I/O to 9-Pin RS-232 DCE Synchronous Interface
 
 
The SC105 Interface connects the radio to the datalogger's CS I/O port.
Temperature Ranges - show details
-ST -ST -25 to +50C
Standard Temperature Testing range is -25° to +50°C. Individual units are warranted to perform within published specifications over this range, which is included with product purchase.
-XT -XT -55 to +85C
Extended Temperature Testing over the -55° to +85°C range is also available. Individual units are subjected to performance tests at these extremes in a test chamber. Units that pass the tests are certified as extended temperature units.

Please note that manual operation of the "Program" button in SC105s may be compromised at extended low temperatures (-25° to -55°C). The program button is used only when configuration settings are being manually downloaded to the device from a computer.
Replacement Parts
 
 
Diagnostics and Programming Cable with Software
 
 
Freewave's Diagnostics & Programming Cable with a CD containing Software may be ordered if your FGR-network has an odd number of radios, or as a replacement item. One CD and diagnostic cable is shipped with a pair of radios.
12 Vdc Power Cable for FGR-115RC Radios
 
 
This DC power cable ships with the FGR-115RC and may be purchased to replace a cable that has been lost or damaged.

Resources and Links