CR9000
Ordering Information
This product is no longer available and has been replaced by: CR9000X. Some accessories, replacement parts, or services may still be available.
Sections:
Replacement Parts,
Services
This product is currently unavailable for orders.
| Replacement Parts | |
| 8223 | CR9000(X) Blank Module |
|
This "blank" (no circuit board or components) occupies one slot in the CR9000 chassis when the slot will be unoccupied by a functional I/O Module, thereby providing a degree of protection for modules in the adjacent slots.
|
|
| 8025 | 3V Coin Cell 24mm Lithium Battery |
|
This battery powers the clock and RAM when the primary 12 Vdc power supply is not connected. The battery must be replaced when its voltage falls below 2.4 Vdc.
|
|
| 10659 | CR9000(X) Strain Relief Adapter |
|
The 10659 Strain Relief Adapter is attached to the chassis of the CR9000 datalogger, and then cable ties are used to fasten the cables to the adapter. By securing the cables to the datalogger's chassis, the likelihood that the sensor cables will be "jerked" out of their screw terminals is reduced.
|
|
| CR9011 | Power Supply Module |
|
The CR9011 Power Supply Module provides regulated power to the CR9000 from the internal battery modules. It also regulates battery charging from power supplied by the ac adapter, a dc input, or other external sources.
|
|
| CR9041 | Analog-to-Digital Module |
|
The CR9041 A/D module provides amplification and signal conditioning for 16-bit, 100 kHz analog-to-digital (A/D) conversions.
|
|
Resources and Links
Feedback?