Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Retired Product

This product is no longer available and has been replaced by: COM220. Some accessories, replacement parts, or services may still be available.

Technical Description

The COM210 modem enabled communications between a computer and a Campbell datalogger via a public switched telephone network. A Hayes-compatible modem was required at the base-station computer while a COM210 was connected to the datalogger at the field site. The COM210's wide operating temperature range and minimal power requirements made it ideal for use at remote sites.

Note

Historically, the 10704 Power Adapter was available for connecting the COM210 to the CR500 with s/n 1764 or lower, and the CR10 with the silver or 8032 black wiring panel. The adapter applied a constant 12 V to the COM210's serial I/O. This power adapter is no longer available.

COM210 Specifications

  • Standards: Bell 212A, CCITT V.22, V.32bis
  • FCC Registration: B9QUSA-31402-MM-T
  • Operating Voltage: 12 volts
  • Current Drain:
    • Quiescent: 120 μA
    • Active: 160 mA
  • Baud Rate: 1200, 4800,
    9600 bps
  • Operation: Full-duplex over standard analog phone lines
  • Standard Operating Temperature:
    -25° to +50°C
  • Extended Operating Temperature:
    -55° to +85°C
  • Weight: 272 g (10 oz)
  • Dimensions with Mounts:
    16.0 x 4.3 x 9.1 cm
    (6.3" x 1.7" x 3.6")
      

Resources and Links

Related Products

Ships With

(*) Instruction Manual

(1) 12 inch Grounding wire w/lug connector

(1) 2365 182 inch Phone cable

(4) 505 Screws

(4) 6044 Grommets

(1) SC12 Serial Cable, 2 ft

*Ships With

Shipping Weights & Dims

Single Box Shipping Weight:
     3.0 lbs
     1.4 kg

Single Box Shipping Dimensions:
     12" x 12" x 6"
     30.5 x 30.5 x 15.2 cm