AVW216

Sensors

The AVW216 Vibrating Wire Spectrum Analyzer Module allows our dataloggers to measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells.

Communications

The AVW216's internal spread spectrum radio can transmit data to other AVW216 interfaces, RF416 spread spectrum radios, and RF432 spread spectrum radios. The AVW216 does not have a transparent mode, and therefore its internal radio cannot communicate with the RF415 radio.

Datalogger Considerations

Compatible Contemporary Dataloggers

CR200(X) Series	CR800/CR850	CR1000	CR3000	CR5000	CR7X	CR9000X
				*

Compatible Retired Dataloggers

CR500	CR510	CR10	CR10X	21X	CR23X	CR9000
		*	*		*

Datalogger Notes:
**The CR5000, CR10(X), and CR23X support the SDI-12 mode only.

Enclosure Considerations

The AVW216 requires a desiccated, non-condensing environment. A Campbell Scientific enclosure is recommended when the interface is in the field. The AVW216 has built-in keyhole flanges for mounting to an enclosure backplate.

Compatible Enclosures

ENC10/12	ENC10/12R	ENC12/14	ENC14/16	ENC16/18
*	*	*

Enclosure Notes:
*If using the RS-232 port, the AVW216 must be mounted flat to fit in an ENC10/12, ENC10/12R, or ENC12/14.

Power Considerations

The AVW216 is typically powered by the datalogger's power supply.