Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Greatly Reduces Signal Noise
Spectral analysis plus high resolution result in better readings
Request a Quote
Ask a Question
Overview
 
Specifications
 
Compatibility
 
Ordering
 
Support
 
Image Gallery

Sensors

The AVW200 Vibrating Wire Spectrum Analyzer Module allows our dataloggers to measure vibrating-wire strain gauges, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells.

Datalogger Considerations

Compatible Contemporary Dataloggers

CR200(X) Series CR800/CR850 CR1000 CR3000 CR5000 CR7X CR9000X
*

Compatible Retired Dataloggers

CR500 CR510 CR10 CR10X 21X CR23X CR9000
* * *

Datalogger Notes:
*The CR5000, CR10(X), and CR23X support the SDI-12 mode only.

Enclosure Considerations

The AVW200 requires a desiccated, non-condensing environment. A Campbell Scientific enclosure is recommended when the interface is in the field. The AVW200 has built-in keyhole flanges for mounting to an enclosure backplate.

Compatible Enclosures

ENC10/12 ENC10/12R ENC12/14 ENC14/16 ENC16/18
* * *

Enclosure Notes:
*If using the RS-232 port, the AVW200 must be mounted flat to fit in an ENC10/12, ENC10/12R, or ENC12/14.

Power Considerations

The AVW200 is typically powered by the datalogger's power supply.