AVW1
Ordering Information
Sections:
Common Accessories,
Replacement Parts
AVW1 Pricing Details
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year
| Model | Description | |||
| AVW1 | 1-Channel Vibrating Wire Interface (1000 - 9900Hz) | |||
| Temperature Ranges (hide details) | ||||
| -ST | -ST Tested -25 to +50C | |||
|
Standard Temperature Testing range is -25° to +50°C. Individual units are warranted to perform within published specifications over this range, which is included with product purchase.
|
||||
| -XT | -XT Tested -55 to +85C | |||
|
Extended Temperature Testing over the -55° to +85°C range is also available. Individual units are subjected to performance tests at these extremes in a test chamber. Units that pass the tests are certified as extended temperature units.
|
||||
| Warranty Lengths (hide details) | ||||
| -SW | -SW Standard 1yr Warranty | |||
|
At the time of purchase, the AVW1 includes a standard warranty of 12 months. See our full warranty policy in the AVW1 manual for the terms and conditions of this warranty.
|
||||
| -XW | -XW 4yr Warr Extension | |||
|
Our Extended Warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.
|
||||
| Common Accessories | ||||
| CABLE5CBL-L | 5-Conductor 22AWG Cable w/Drain | |||
|
The CABLE5CBL-L is used to connect the AVW1 to the datalogger. This 24-AWG, five-conductor cable has a Santoprene jacket and an aluminum mylar shield.
|
||||
| CABLE5CBL-L Options (hide details) | ||||
| -L | ft per cable | |||
|
The CABLE5CBL-L is used to connect the AVW1 to the datalogger. This 24-AWG, five-conductor cable has a Santoprene jacket and an aluminum mylar shield.
|
||||
| Cable Termination Options (hide details) | ||||
| -PT | -PT w/Tinned Wires | |||
|
The CABLE5CBL-L is used to connect the AVW1 to the datalogger. This 24-AWG, five-conductor cable has a Santoprene jacket and an aluminum mylar shield.
|
||||
| -PW | -PW w/Pre-Wire Connector | |||
|
The CABLE5CBL-L is used to connect the AVW1 to the datalogger. This 24-AWG, five-conductor cable has a Santoprene jacket and an aluminum mylar shield.
|
||||
| Replacement Parts | |
| 6209 | AVW1 Mounting Bracket |
|
The 6209 Mounting Bracket attaches the AVW1 to the 1"-on-center hole grid of a Campbell Scientific enclosure. The AVW1 mounts to the bracket via (2) #58 screws. The bracket is attached to the enclosure with (2) #505 screws that seat into (2) #6044 grommets.
|
|
Resources and Links
Related Products
Shipping Weights & Dims
Single Box Shipping Weight:
3.0 lbs
1.4 kg
Single Box Shipping Dimensions:
12" x 12" x 6"
30.5 x 30.5 x 15.3 cm
3.0 lbs
1.4 kg
Single Box Shipping Dimensions:
12" x 12" x 6"
30.5 x 30.5 x 15.3 cm
Feedback?