Retired Categories
SC105 DCE Synchronous Interface
The SC105 Interface supports communications between a Campbell Scientific datalogger and an RS-232 DCE device. Common DCE devices used with the SC105 include our RavenXT-series...
SC932A 9-Pin to 9-Pin RS-232 Interface
The SC932A supports two-way communications between a datalogger and a device that is configured with an RS-232 DCE serial port. Common Campbell Scientific devices used...
15751 RS-232 Adapter, 9-Pin Female to 25-Pin Male
This specialized 9-pin to 25-pin adapter is commonly used to connect a RAD modem with a datalogger.
SC932C CSL RAD Modem Interface w/o Mounting Hardware
The SC932C supports communications between a datalogger and a device configured with an RS-232 DCE serial port. The SC932C is typically used with the ET107...
SC532A CS I/O Peripheral to RS-232 Interface
The SC532A interface enables communications between a PC and some Campbell Scientific 9-pin peripherals. It is required to transfer programs and data to a storage...
10871 RS-232 Adapter, 9-Pin Male to 25-Pin Female
The 10871 provides a 9-pin male connector on one end and a 25-pin female connector on the other end. Typically, this serial adapter is used...
SDS122 Two-Way Serial Data Switch
The SDS122 is a configurable, two-way serial data switch that allows two modem devices to be connected to a datalogger at the same time. The...
SDS511 Dual CS I/O Port Adapter
The SDS511 dual port adapter allows two communication devices to be connected to one datalogger CS I/O port. Communications are determined on a first-come-first-served basis...
About Communication Peripherals
Some of our communication devices require a peripheral to complete the connection. Devices that require a communication peripheral include cellular modems, short-haul modems, and fiber optic converters. Campbell Scientific also offers communication peripherals that allow multiple communication devices to be connected at one time.
Feedback?