31329
31329
OrderableSurge Protection Kit, Type N to N, 100 to 512 MHz
Overview
The 31329 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:
- RF protector with hardware, suitable for 100 to 512 MHz
- Flange mounting bracket
- 18 in. Type N to Type N coaxial jumper
- 24 in. ground wire assembly
Benefits
- Superior coil inductor surge performance design
- Weatherproof when installed
Specifications
Coaxial Jumper
- Connector 1
- Type N plug
- Connector 2
- Type N plug
- Cable
- RG174/U
- Length
- 45.7 cm
(18 in.)
Surge
- Frequency
- 100 to 512 MHz
- Connectors
- Type N jack
- Mounting
- Bulkhead or flange mount
- Operation
- DC block
(RF only)
- Insertion Loss
- < 0.1 dB
- Maximum Surge
- IEC 61000-4-5 8/20 μs waveform20 kA
- Temperature
- -50° to +85°C
- Standards
- CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487
- Type N Connector Length
- 2.41 cm
(0.95 in.)
- Dimensions
- 9.27 x 7.16 x 3.55 cm
(3.65 x 2.82 x 1.40 in.)
- Weight
- 226.8 g
(0.5 lb)
Flange Mount
- Material
- Aluminum with stainless-steel screws, nuts, and washers
- Dimensions
- 3.81 x 2.54 x 2.85 cm
(1.5 x 1.0 x 1.12 in.)
Ground Wire
- Wire Type
- 12 AWG stranded with PVC jacket
- Connector
- 5/8 crimp ring lug, soldered
- Length
- 61 cm
(24 in.)
Replacement Parts
(5)43529
Surge Suppressor Flange Mounting Bracket
The 43529 is a bulkhead-to-flange-mount adapter that can be used to mount our RF surge and bulkhead fitting products to an enclosure backplate.
Orderable14464
Nylon Grommet for #10 Screw
The 14464 is a one-piece, non-corrosive nylon, self-retaining blind screw receptacle. It snaps into the square holes punched into our enclosure backplates. It accepts a #10 screw.
Orderable15763
Screw #10-16 x .625 Pan Phillips Self-Threading Type BSS
The 15763 is a thread-forming screw.
Orderable31319
RG174 Antenna Cable, Type N Pin (Male) to Type N Pin (Male)
The 31319 is an 18 in. RG174/U coaxial cable jumper. Both ends are fitted with a straight Type N plug connector.
Orderable29553
Surge Suppressor, Type N Socket (Female), Bulkhead Mounting Grounding Cable
The 29553 is a ground lug and wire assembly used to ground our RF surge and bulkhead fitting products. The 24 in., 12 AWG, stranded wire is terminated on one end with a 5/8 in. ring lug. The lug is positioned between the RF connector and the enclosure wall, or the lug is secured using the nut and lock washer supplied with the RF connector.
Orderable
Ships With
(5)29553
Surge Suppressor, Type N Socket (Female), Bulkhead Mounting Grounding Cable
Orderable31319
RG174 Antenna Cable, Type N Pin (Male) to Type N Pin (Male)
Orderable43529
Surge Suppressor Flange Mounting Bracket
OrderableQty 314464
Nylon Grommet for #10 Screw
Orderable15763
Screw #10-16 x .625 Pan Phillips Self-Threading Type BSS
Orderable
Similar Products
(6)31314
Surge Protection Kit, Type N to RPSMA, 700 to 2700 MHz
Orderable31317
Surge Protection Kit, Type N to SMA, 700 to 2700 MHz
Orderable31320
Surge Protection Kit, Type N to N, 700 to 2700 MHz
Orderable31323
Surge Protection Kit, Type N to TNC, 700 to 2700 MHz
Orderable31326
Surge Protection Kit, GPS Antenna Type N to SMA
Orderable31332
Surge Protection Kit, Type N to BNC, 100 to 512 MHz
Orderable
