Overview

The SC932C supports communications between a datalogger and a device configured with an RS-232 DCE serial port. The SC932C is typically used with the ET107 or ET106 Weather Stations, and it is a component of the 10589 ET Short Haul Modem Kit.

The SC932C is only recommended for applications where there are space limitations; the SC932A is recommended for all other applications.



Compatibility

Datalogger Considerations

Compatible Contemporary Dataloggers

CR200(X) Series CR800/CR850 CR1000 CR3000 CR5000 CR7X CR9000X

Compatible Retired Dataloggers

CR500 CR510 CR10 CR10X 21X CR23X CR9000

Documents


Frequently Asked Questions

Number of FAQs related to Products: 2

  1. Campbell Scientific recommends using an SC932A instead. The SC932C is only recommended for applications where there are space limitations, whereas the SC932A is recommended for all other applications.

  2. If connecting to the CS I/O port, one of the following is needed:

    • An SC932A interface with a 15751 9 to 25 pin adapter
    • An SC932C interface

    A connection can also be made to the RS-232 port. However, the switch on the SRM-5A must be in the DTE position on the station modem, and adapters and gender changers may be needed to complete the connection.