05106-L
Wind Monitor, Marine
Reliable, Accurate Wind Measurements
Compatible with most Campbell Scientific dataloggers
Compatible with most Campbell Scientific dataloggers
05106-L Pricing Details
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year
| Model | Description | |||
| 05106-L | RM Young Wind Monitor Marine Version | |||
| 05106-L Options (hide details) | ||||
| -L | ft cable per sensor | |||
|
Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
|
||||
| Cable Termination Options (hide details) | ||||
| -PT | -PT w/Tinned Wires | |||
|
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
|
||||
| -PW | -PW w/Pre-Wire Connector | |||
|
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
|
||||
| -CWS | -CWS w/CWS900 Connector | |||
|
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.
|
||||
| Common Accessories | |
| 17953 | 1 x 1 inch NURAIL Crossover Fitting |
|
The 17953 NU-RAIL® Crossover Fitting is used to mount this sensor to a crossarm or a user-supplied 1" IPS pipe. This usage is equivalent to the functionality provided by the CM220 Right Angle Mounting Bracket.
|
|
| CM220 | Right Angle Mounting Kit |
|
The CM220 Right Angle Mounting Bracket is used to mount this sensor to a crossarm or a user-supplied 1" IPS pipe.
|
|
| CM216 | Sensor Mounting Kit for Top of SS Tripod Mast for CM110-series |
|
The CM216 Sensor Mount provides a connection point for this sensor to be attached to the top of a stainless steel CM110, CM115, or CM120 Tripod.
|
|
| Other Accessories | ||||
| -SW | -SW Standard 1yr Warranty | |||
|
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
|
||||
| -XW | -XW 4yr Warr Extension | |||
|
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
|
||||
| LLAC4 | 4-Channel Low-Level AC Conversion Module | |||
|
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
|
||||
| Warranty Lengths (hide details) | ||||
| Replacement Parts | ||||
| 05106CBL-L | 05106-L Replacement Cable | |||
|
The 05106CBL-L Replacement Cable has a connector on one end and pigtails on the other end. The pigtails connect to the datalogger's input terminals. The connector connects to the 3-foot (1-m) cable that is attached to the Wind Monitor. The 05106CBL is typically ordered with 7, 10, 16, 21, or 31 ft length. These lengths provide a total cable length of 10, 13, 19, 24, or 34 ft.
The 05106CBL-L was previously ordered at the 17145. |
||||
| 05106CBL-L Options (hide details) | ||||
| -L | ft per sensor cable | |||
|
The 05106CBL-L Replacement Cable has a connector on one end and pigtails on the other end. The pigtails connect to the datalogger's input terminals. The connector connects to the 3-foot (1-m) cable that is attached to the Wind Monitor. The 05106CBL is typically ordered with 7, 10, 16, 21, or 31 ft length. These lengths provide a total cable length of 10, 13, 19, 24, or 34 ft.
The 05106CBL-L was previously ordered at the 17145. |
||||
| Cable Termination Options (hide details) | ||||
| -PT | -PT w/Tinned Wires | |||
|
The 05106CBL-L Replacement Cable has a connector on one end and pigtails on the other end. The pigtails connect to the datalogger's input terminals. The connector connects to the 3-foot (1-m) cable that is attached to the Wind Monitor. The 05106CBL is typically ordered with 7, 10, 16, 21, or 31 ft length. These lengths provide a total cable length of 10, 13, 19, 24, or 34 ft.
The 05106CBL-L was previously ordered at the 17145. |
||||
| -PW | -PW w/Pre-Wire Connector | |||
|
The 05106CBL-L Replacement Cable has a connector on one end and pigtails on the other end. The pigtails connect to the datalogger's input terminals. The connector connects to the 3-foot (1-m) cable that is attached to the Wind Monitor. The 05106CBL is typically ordered with 7, 10, 16, 21, or 31 ft length. These lengths provide a total cable length of 10, 13, 19, 24, or 34 ft.
The 05106CBL-L was previously ordered at the 17145. |
||||
| -CWS | -CWS w/CWS900 Connector | |||
|
The 05106CBL-L Replacement Cable has a connector on one end and pigtails on the other end. The pigtails connect to the datalogger's input terminals. The connector connects to the 3-foot (1-m) cable that is attached to the Wind Monitor. The 05106CBL is typically ordered with 7, 10, 16, 21, or 31 ft length. These lengths provide a total cable length of 10, 13, 19, 24, or 34 ft.
The 05106CBL-L was previously ordered at the 17145. |
||||
| 13895 | Replacement Vertical Shaft Bearing for 05103 or 05106 (two required) | |||
|
The 13895 bearings allow the wind vane to turn about the axis of the mounting shaft. These bearings are located within the shaft assembly and replacement at the factory is strongly recommended; please request an RMA.
|
||||
| 13894 | Replacement Propeller Shaft Bearing for 05103 or 05106 (two required) | |||
|
The 13894 bearings are located in the propeller housing. The bearings can be replaced by mechanically-adept users—especially if they are familiar with replacing bearings in other mechanical systems. Otherwise, replacement at the factory is recommended (requires an RMA).
|
||||
Resources and Links
Related Products
Ships With
(1) Allen wrench from original mfg
(1) Bearing spacer from original mfg
(1) Calibration Sheet
(1) 3659 Aluminum pipe
Shipping Weights & Dims
Single Box Shipping Weight:
5.0 lb plus 0.3 lb per
10' of cable
2.3 kg plus 0.14 kg per
3.05 m of cable
Single Box Shipping Dimensions:
29" x 17" x 9"
73.7 x 43.2 x 22.9 cm
5.0 lb plus 0.3 lb per
10' of cable
2.3 kg plus 0.14 kg per
3.05 m of cable
Single Box Shipping Dimensions:
29" x 17" x 9"
73.7 x 43.2 x 22.9 cm
Feedback?