05103-L
Wind Monitor
Reliable, Accurate Wind Measurements
Compatible with most Campbell Scientific dataloggers
Compatible with most Campbell Scientific dataloggers
05103-L Pricing Details
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year
Educational Discounts: Yes Quantity Discounts: Yes Restockable: Yes Warranty: 1 year
| Model | Description | |||
| 05103-L | RM Young Wind Monitor | |||
| 05103-L Options (hide details) | ||||
| -L | ft cable per sensor | |||
|
Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
|
||||
| Cable Termination Options (hide details) | ||||
| -PT | -PT w/Tinned Wires | |||
|
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
|
||||
| -PW | -PW w/Pre-Wire Connector | |||
|
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
|
||||
| -CWS | -CWS w/CWS900 Connector | |||
|
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.
|
||||
| Common Accessories | |
| 17953 | 1 x 1 inch NURAIL Crossover Fitting |
|
The 17953 NU-RAIL Crossover Fitting can be used instead of the CM220 to attach this sensor to a CM202, CM204, or CM206 crossarm.
|
|
| CM220 | Right Angle Mounting Kit |
|
The CM220 Right-angle Mounting Bracket attaches this sensor to a CM202, CM204, or CM206 crossarm.
|
|
| CM216 | Sensor Mounting Kit for Top of SS Tripod Mast for CM110-series |
|
The CM216 Sensor Mount provides a connection point for this sensor to be attached to the top of a stainless-steel CM110, CM115, or CM120 Tripod.
|
|
| Other Accessories | ||||
| -SW | -SW Standard 1yr Warranty | |||
|
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
|
||||
| -XW | -XW 4yr Warr Extension | |||
|
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
|
||||
| LLAC4 | 4-Channel Low-Level AC Conversion Module | |||
|
The LLAC4 can be used to increase the number of sensors measured by one datalogger.
|
||||
| Warranty Lengths (hide details) | ||||
| Replacement Parts | |
| 13894 | Replacement Propeller Shaft Bearing for 05103 or 05106 (two required) |
|
The 13894 bearings are located in the propeller housing. The bearings can be replaced by mechanically-adept users—especially if they are familiar with replacing bearings in other mechanical systems. Otherwise, replacement at the factory is recommended (requires an RMA).
|
|
| 13895 | Replacement Vertical Shaft Bearing for 05103 or 05106 (two required) |
|
The 13895 bearings allow the wind vane to turn about the axis of the mounting shaft. These bearings are located within the shaft assembly and replacement at the factory is strongly recommended; please request an RMA.
|
|
Resources and Links
Related Products
Ships With
Shipping Weights & Dims
Single Box Shipping Weight:
5.0 lb plus 0.3 lb per
10' of cable
2.3 kg plus 0.14 kg per
3.05 m of cable
Single Box Shipping Dimensions:
29" x 17" x 9"
73.7 x 43.2 x 22.9 cm
5.0 lb plus 0.3 lb per
10' of cable
2.3 kg plus 0.14 kg per
3.05 m of cable
Single Box Shipping Dimensions:
29" x 17" x 9"
73.7 x 43.2 x 22.9 cm
Feedback?