Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Reliable, Accurate Wind Measurements
Special cable connectors
Ask a Question
Sections: Common Accessories, Replacement Parts
034B-LQ Pricing Details
Educational Discounts: Yes    Quantity Discounts: Yes    Restockable: Yes    Warranty: 1 year   
Model Description
034B-LQ Met One Wind Set for RAWS Station
Cable Length (hide details)
-LQ ft cable per sensor
Custom lead lengths are available for up to 1000 feet. Campbell Scientific recommends:
  • 11 ft—sensor mounted atop a CM6 via a CM202
  • 14 ft—sensor mounted atop a CM106, CM10, CM110, or UT10 via a CM202
  • 19 ft—sensor mounted atop a CM115 via a CM202
  • 24 ft—sensor mounted atop a UT20 via a CM202
  • 37 ft—sensor mounted atop a UT30 via a CM202
detail preferences (hide details)
Common Accessories
(hide details)
17953 1 x 1 inch NURAIL Crossover Fitting
The 17953 NU-RAIL® Crossover Fitting is used to mount this sensor to a CM202, CM204, or CM206 crossarm. It provides equivalent functionality as the CM220 Right Angle Mounting Bracket.
CM220 Right Angle Mounting Kit
The CM220 Right-angle Mounting Bracket attaches this sensor to a CM202, CM204, or CM206 crossarm.
CM216 Sensor Mounting Kit for Top of SS Tripod Mast for CM110-series
The CM216 Sensor Mount provides a connection point for this sensor to be attached to the top of a stainless steel CM110, CM115, or CM120 Tripod.
Replacement Parts
(hide details)
13764 034B or 034A Replacement Reed Switch
The 13764 034B Replacement Reed Switch is difficult to replace without shattering the reed switch in the installation process. Factory repair is recommended.
13765 034B or 034A Replacement Wind Vane Tail
The 13765 wind vane tail can be replaced by the user.
15954 Replacement Potentiometer w/Mount Assembly for 034B
The 15954 potentiometer and mount assembly is difficult to replace. Factory replacement is recommended. The mount assembly is aligned with the potentiometer allowing a reference point on the potentiometer to be maintained during installation.
16895 034B or 034A Replacement Calibration Screw or Shoulder Bolt
The 16895 Calibration Screw holds the vane stationary during the calibration process.
3648 034B, 014A, or 034A Replacement Bearing (Requires 2)
The 3648 bearing is difficult to replace without shattering the adjacent reed switch. Factory replacement is recommended. Two bearings are required.

Resources and Links

Ships With

(3) Direction hub stickers

(1) 1/16" Allen wrench from original manufacturer

(1) Calibration sheet

(1) Wind Vane