03101-L

Mounting

The 03101 anemometer is supplied with a galvanized 10-in.-long x ¾-in. IPS threaded pipe, which mounts to a crossarm via a CM220 mount or 1049 NU-RAIL fitting. The  03101 can also be mounted to the top of a CM110, CM115, or CM120 stainless-steel tripod via the CM216.

Wind Profile Studies

An ideal application for the Wind Sentry is wind profile studies. For this application, the LLAC4 4-channel Low Level AC Conversion Module can be used to increase the number of anemometers measured by one datalogger. The LLAC4 allows datalogger control ports to read the anemometer’s ac signals instead of using pulse channels. Dataloggers compatible with the LLAC4 are the CR200(X)-series (ac signal ≤1 kHz only), CR800, CR850, CR1000, CR3000, and CR5000.

Datalogger Considerations

The 03101 uses one pulse count channel on the datalogger.

Programming

The 03101 is read by the PulseCount Instruction in CRBasic and by Instruction 3 (Pulse Count) in Edlog. Wind speed measurements can be taken and processed with any of the dataloggers.

Compatible Contemporary Dataloggers

CR200(X) Series	CR800/CR850	CR1000	CR3000	CR5000	CR7X	CR9000X

Compatible Retired Dataloggers

CR500	CR510	CR10	CR10X	21X	CR23X	CR9000