Measurement and Control Products for WEATHER Measurement and Control Products for WATER Measurement and Control Products for ENERGY Measurement and Control Products for MACHINES Measurement and Control Products for STRUCTURES Measurement and Control Products for EARTH
Retired Product

This product is no longer available and has been replaced by: 03002-L. Some accessories, replacement parts, or services may still be available.

Sections: Other Accessories, Replacement Parts

This product is currently unavailable for orders.

Other Accessories
(hide details)
1049 3/4 x 1 inch NURAIL Crossover Fitting
This NU-RAIL Slip-on Offset Crossover fitting attaches to one end of CM202, CM204, or CM206 Crossarm. It provides essentially the same functionality as the CM220."
CM220 Right Angle Mounting Kit
The CM220 Right Angle Mounting Bracket is used to mount this sensor to a crossarm or a user-supplied 1" IPS pipe.

Formerly ordered as the -SM option.
CM216 Sensor Mounting Kit for Top of SS Tripod Mast for CM110-series
The CM216 Sensor Mount provides a connection point for this sensor to be attached to the top of a stainless steel CM110, CM115, or CM120 Tripod.
Replacement Parts
(hide details)
03101CBL-L 03101-L Replacement Wind Speed Cable
The 03101CBL cable attaches to the anemometer. It consists of a 22 AWG cable with a Santoprene jacket and a connector. The 03101CBL can easily be replaced by the user.
03101CBL-L Options (hide details)
-L ft per sensor cable
The 03101CBL cable attaches to the anemometer. It consists of a 22 AWG cable with a Santoprene jacket and a connector. The 03101CBL can easily be replaced by the user.
Cable Termination Options (hide details)
-PT -PT w/Tinned Wires
The 03101CBL cable attaches to the anemometer. It consists of a 22 AWG cable with a Santoprene jacket and a connector. The 03101CBL can easily be replaced by the user.
-PW -PW w/Pre-Wire Connector
The 03101CBL cable attaches to the anemometer. It consists of a 22 AWG cable with a Santoprene jacket and a connector. The 03101CBL can easily be replaced by the user.
03301CBL-L 03001-L Replacement Wind Direction Sensor Cable
The 03301CBL-L cable attaches the vane. It consists of a 22 AWG cable with a Santoprene jacket and a connector. The 03301CBL can easily be replaced by the user.
Cable Length (hide details)
-L ft per sensor cable
The 03301CBL-L cable attaches the vane. It consists of a 22 AWG cable with a Santoprene jacket and a connector. The 03301CBL can easily be replaced by the user.
4609 Replacement Wind Speed Cup Assembly for 03001 or 03101
The 4609 3-cup anemometer assembly can be easily replaced by the user.
4610 Replacement Assembly for 03001 or 03301 Wind Vane
Replacement of the 4610 Vane Assembly is difficult as it requires calibration of potentiometer after replacement. Returning the sensor to the factory is recommended. Please request assistance.
6332 3/4 IPS Unthreaded Pipe Aluminum, 10 inches Long
This unthreaded pipe is used to mount the sensor to a crossarm. The pipe is easily replaced by the user.
6700 Replacement Potentiometer for 03001 or 03301 Vane
Replacement of the 6700 Potentiometer is difficult because it requires the potentiometer be soldered into place, and the potentiometer needs to be recalibrated after replacement. Returning the sensor to the factory is recommended. Please request assistance.
6701 Replacement Wind Speed Coil for 03001 or 03101
Replacement of the 6701 Anemometer Coil is difficult; it requires that the coil be soldered into place and the sensor be recalibrated after replacement. Returning the sensor to the factory is recommended. Please request assistance.
6702 Replacement Wind Speed Flange Bearing for multiple RM Young Wind Sensors
The 6702 provides a shielded bearing with oil lube. The bearings can be replaced by the user. Two are required.

Resources and Links

Ships With

(2) Allen wrench from original mfg

(1) 03101CBL-L Wind Speed cable of user specified length

(1) 03301CBL-L Wind Direction cable of user specified length

(1) 6332 Mounting pipe

Shipping Weights & Dims

Single Box Shipping Weight:
     3 lb plus 0.3 lb per
        10' of cable
     1.4 kg plus 0.14 kg per
        3.05 m of cable

Single Box Shipping Dimensions:
     24" x 18" 10"
     1.0 x 45.7 x 25.4 cm
Home \ Products \ Components \ Sensors \ Wind... \ 03001-L