024A-L

Mounting

The 024A can be attached to a CM202, CM204, or CM206 crossarm via a 17953 NU-RAIL fitting or a CM220 Right Angle Mounting Bracket. Alternatively, the 024A can be attached to the top of our stainless-steel tripods via the CM216 Sensor Mounting Kit. The CM216 extends 4 in. above the mast of a stainless-steel CM110, CM115, or CM120 tripod.

Datalogger Considerations

The 024A uses one single-ended input channel on the datalogger. An excitation channel is required but due to the high impedance of the 024A, can be shared with other high impedance sensors.

Programming

The 024A is read by the BrHalf instruction in CRBasic and by Instruction 4 (Excite-Delay-Single-ended Measurement) in Edlog. The measurements are typically processed for output with the Wind Vector instruction (not present in the CR500 or CR9000).

Compatible Contemporary Dataloggers

CR200(X) Series	CR800/CR850	CR1000	CR3000	CR5000	CR7X	CR9000X

Compatible Retired Dataloggers

CR500	CR510	CR10	CR10X	21X	CR23X	CR9000